Creative Canvas Home Page
Our Products
Canvas Care
Our History
Important Links
Information and Feedback form

Our Products

Tops and Enclosures

Bimini Top- A bimini top is a free standing top that provides shade and some protection from the rain.  The length can be either six or eight feet long and the height is variable depending on customer preference.  All tops include mounting hardware and a matching storage boot.

Convertible Top-  A convertible top is a shade top that connects to the top edge of the windshield across the front and is free standing at the back.  Height and length are limited depending on the boat. 

Clear Curtains- All clear curtains are made from a clear or tinted vinyl that comes in three gauges or thicknesses and are attached to the top with zippers and to the boat with snaps.  They are sold either as a Windshield Set, which is one curtain across the front of the top and one on each side (three curtains in all), or as a Windshield Only or Side Curtains Only.

Aft Curtain- An aft curtain attaches directly to the back edge of the top with a zipper and angles down to the transom.  This is a fabric curtain with a clear plastic window sewn in.

Camper Canvas- A camper canvas is a four-piece set.  First there is a second top added that attaches to the back edge of the front top with a zipper.  This top will maintain the same height all the way to the back of the boat.  Then three curtains are added, one across the back and one on each side.  Each curtain includes a zippered window and a permanent screen.  Also included in the back curtain is a zippered doorway to match the transom door.

Spray Hood- A spray hood is a cave like shelter commonly added to center console boats.  Height and length are customized to each boat and include a boot and storage straps.

Pontoon and Deck Boat Enclosures- These enclosures can be created for one top or for two connecting tops.  They include curtains all the way around the boat with window and screen combinations on all curtains except the front ,which will have just a clear plastic window.  All doorways in the boat will have matching doorways in the curtains.



Covers

Bow Cover- A bow cover uses snaps to cover the bow area.  The cover extends under the bottom edge of the center-opening windshield and includes a tent pole to prevent puddling. 

Cockpit Cover- This covers the cockpit area from the windshield to the back of the boat.  It can be attached either at the top or bottom of the windshield and can be notched to accommodate a bimini top.

Full Mooring Cover- This covers the whole boat and can either snap on or tie on depending on how the boat is stored.  A snap-on cover will snap to the boat just above the rubrail all the way around.  A tie-on cover will extend about six inches below the rubrail with a skirt that has a drawstring and grommets with strings that tie down to the trailer.  All covers are reinforced to prevent corners form wearing holes in the cover and tent poles to prevent puddling. 

Console Cover- This covers just the console of a center console boat.  It is attached to the console with snaps.

 

 

 


Phone:  407-661-1211
Fax:  407-611-1135
Mobile:  407-222-3988
creative@creativecanvasfl.com

 

Copyright © 2001 - 2006
AdAstra Technologies Inc.
All Rights Reserved